Automatic Steel Sheet Slitting Line | Over 20 Years Carbon Steel and Stainless Steel Tube Mills Manufacturer | Sunfone Technology Co., Ltd.

Leading expert in supply accurate and precise Steel Sheet Slitting Machine / Sunfone Technology Co., Ltd. is mainly a carbon steel and stainless steel tube mill manufacturer who has gathered development, design, R&D, manufacturing, and sales and put them all together to fit each of our customers need.

Automatic Steel Sheet Slitting Line - Sunfone Technology offer Automatic Steel Sheet Slitting Line/Machine, made in Taiwan. Custom-made Slitting line provide hgih quality slitting job in economical solution.
  • Automatic Steel Sheet Slitting Line - Sunfone Technology offer Automatic Steel Sheet Slitting Line/Machine, made in Taiwan. Custom-made Slitting line provide hgih quality slitting job in economical solution.

Automatic Steel Sheet Slitting Line

SF-160 / SF-180 / SF-220 / SF-250 / SF-280

Leading expert in supply accurate and precise Steel Sheet Slitting Machine

Sunfone Technology Co., Ltd offer standard models of accurate & precise Uncoil Recoil Slitting Line Machine.

The lines can cut from 0.2mm up to 8.0mm with different coil width and weight. Slitting speed max 120m/min , No. of slit steps from 4 up to 40.

Ferrous and non-ferrous metals such as hot and cold rolled carbon steel, stainless steel, aluminum, brass, copper, galvanized metals, and different kinds of alloys can all be slit by these lines.

We are proud to supply profession suggestion, custom-made specification to meet specific prodcution needs.Our goal is to maximize your productivity.

Feature
  • Through the use of a PLC (programmable logic controller), system performance will be based upon the characteristics of the various sheet metals being used. There are also switches that are able to change from high to low operating speeds automatically, which allows the machine to achieve improved efficiency as well as reduce the amount of maintenance needed over time.
  • The material un-coiler uses an expand / shrink hydraulic cylinder that is mounted on an integrated steel frame. This allows for less malfunctions of the machine throughout its use.
  • The material un-coiler is equipped with a high-efficiency disc-type brake. Its tension is adjusted by an air pressure loop. Under these circumstances, the time for tension adjustments is reduced as well as the forcing of the monetary braking occurs thus freeing itself from the loosened coil.
  • The pre-loader is equipped with a DC various-speed motor drive, so that a synchronized speed that cooperates with the production line could be governed.
  • Slitting knives are mounted on an integrated frame with a separated transmission. This allows for: enhanced rigidity structure of the machine, lower vibration amplitude of the knives, and excellent yields are allowed to be produced.
  • The datum plane and accuracy of the slitting knives axes are all to be fabricated within a measurement of 0.006mm. in tolerance, this makes allows for a higher duration of slitting knives as well as a much more accurate and larger number of outputs from the slitting line.
  • To make sure the stability of the slitting line is secure during operation, the tension controlled roll-up device with slip-differential structure has been designed for the waster.
  • The straight type tightener uses high elastics and resistive carpets as surface materials. This keeps the outputs of the line much smoother. In addition, it is also equipped with a pressure-balance device that keeps an even amount of pressure on both sides of the materials that are touching the tightener.
  • The Re-coiler is equipped with an improved high rigid holder that causes a reduction of lead-time. An air pressurized, adjustable back-pressure device is also equipped on the separator mechanism, this allows a constant hold-pressure to be reached for the recoil.
  • The enabling of self-tension design makes it able to retain a better tightness for recoil.
ModelSteel Sheet Thickness (mm)Steel Sheet Width (mm)No. of slit stepsCoil Weight (Ton)Slitting Speed (Max.)
SF-160 0.2~2.0 600~1550 16~40 5~20 0~120m/min
SF-180 0.4~3.2 600~1550 10~36 5~20 0~120m/min
SF-220 0.4~5.0 600~1850 10~36 5~25 0~100m/min
SF-250 0.4~6.0 600~1850 6~30 5~25 0~90m/min
SF-280 1.0~8.0 600~1850 4~30 5~25 0~80m/min

* This stype of machine counted by the slitting shaft and based on carbon steel coils.

Certificate
  • ISO 9002
Movie

SF-180 Double-Seat Steel Sheet Slitting Line, Vietnam



SF-230 Double-Seat Steel Sheet Slitting Line- Exchange Car (1)



SF-230 Double-Seat Steel Sheet Slitting Line- Exchange Car (2)



SF-230 Double-Seat Steel Sheet Slitting Line- Exchange Car (3)



SF-230 Double-Seat Steel Sheet Slitting Line in Vietnam(1)



SF-230 Double-Seat Steel Sheet Slitting Line in Vietnam(2)



SF-230 Single-Seat Steel Sheet Slitting Line in Vietnam



Related Products
Mini Slitter Line - Mini Steel Sheet Slitter Line, Slitting Machine
Mini Slitter Line
SF-100 / SF-150

There are two model of Mini Steel Sheet Slitter Line. Slitting Speed Max 120m/min with steel...

Details
Quality Slitting Line - 0.2mm-1.5mm Seamless Slitting Machine - 0.2mm-1.5mm Seamless Slitting Machine
Quality Slitting Line - 0.2mm-1.5mm Seamless Slitting Machine
SF-160

SF 160 Slitting Line was designed for a Japanese company that is specialized in providing coils...

Details

Automatic Steel Sheet Slitting Line - Leading expert in supply accurate and precise Steel Sheet Slitting Machine | Over 20 Years Carbon Steel and Stainless Steel Tube Mills Manufacturer | Sunfone Technology Co., Ltd.

Located in Taiwan since 2000, Sunfone Technology Co., Ltd. has been a tube mills manufacturer. Their main tube making equipment, including Automatic Steel Sheet Slitting Line, High Frequency Tube Mills, Automatic Steel Coil Slitting Lines, CNC Cut-to-Length Machines, Round/Square Tube Polish Machines, End Facing Machines, Straightening Machines, Saw Blade Grinding Machines, Eddy Current Testers and Hydrostatic Testers, which are ISO and CE certified.

Sunfone Tech provides types of carbon, stainless steel, CNC, and slitting line mills that are able to produce materials for parts such as: carbon bottle cages, carbon bicycle parts, carbon seat-posts, carbon headset spacers, carbon bike stems, carbon fiber tubes, and many more. Moreover, tubes manufactured by Sunfone's tube mills are broadly used in different industries including: automotive, furniture, sanitation, bathroom equipment, chemistry equipment, food processing, cleaning industries, etc.

Sunfone Tech has been offering customers high-quality carbon steel and stainless steel tube mills, both with advanced technology and 20 years of experience, Sunfone Tech ensures each customer's demands are met.